Best Bolts for Crossbows (Must Read Reviews)

Bolts for crossbows – Reviews and Comparison

If you want to find the best hunting equipment but don’t have the time to read through the buying tips and reviews prepared by our research team, this short paragraph should provide you with all of the information you need about the best bolt for crossbow. A large amount of feedback from amateur and professional hunters and target shooters was analyzed, and the Barnett Outdoors Carbon was determined to be the best because it comes in a set of five arrows, which provides genuine value for money for those on a tight budget. The 20-inch, 8.1-ounce arrows have lightweight but strong carbon shafts, as well as increased wall thickness to ensure greater durability and long-term performance. Get maximum accuracy and dependable target penetration with the 100-grain point and 13.78 grains per inch thanks to the high density of the bullet. The arrows in the set are compatible with a variety of crossbows, including the Jackal, Wildcat C-5, Penetrator, and Ghost 350. They have 24F field points and moon nocks, which allow for easy removal when embedded and trouble-free string alignment when not in use. However, if you are unable to obtain an availability of the Barnett Outdoors Carbon, you should consider the Carbon Express PileDriver, which is a reliable alternative in terms of performance and quality.

Comparison table

1. Barnett Outdoors Carbon Crossbow Arrows

The Barnett Outdoors Carbon, which is constructed of composite carbon shafts, is composed of five arrows in a single package, giving you more bang for your buck. Because the wall thickness of each of the arrows is more consistent, greater durability can be assured. When used in the field, these best carbon crossbow bolts will ensure a clean, humane kill every time because they are designed to deliver maximum penetration and accuracy at all times. These specific bolts are able to fly quickly and accurately to the target because of their intelligent fletchings, which are equipped with 4-inch vanes that slice through the air to propel the bolts to the desired spot on the target. Each arrow is made with 13.78 Grains Per Inch and 100 Grain Point for the highest level of craftsmanship and durability possible. The moon nocks make it simple to connect and draw with the bowstring, resulting in a trouble-free setup and release every time. The lightweight but strong shafts on the bolts allow for extended periods of operation. They are designed to be compatible with a wide range of crossbows, allowing them to be used for target practice and hunting activities. With the high-quality bolts included in this convenient package, you can discover your true shooting abilities. Because of the high quality of the craftsmanship and the superior durability of the shafts, you can rest assured that they will not break or splinter. You will be amazed at what you can accomplish with these arrows.

Pros

Each of these field point arrows is 20 inches long and comes in a set of five. They are best suited for hunting medium-sized animals because of their length. Half-moon nocks and strong but lightweight carbon shafts distinguish them from the competition. In order to increase durability while also improving precision when shooting, the wall thickness of these ones has been increased. Make sure to use caution as these arrows are extremely sharp and provide the greatest amount of accuracy and penetration, making them ideal for hunting or competitions. The majority of customers are pleased with the quality of these arrows and believe that they can annihilate more than one target with the same arrow if the broadhead is changed between targets.

Cons

Some other buyers, on the other hand, have complained that the arrows or bolts are not as accurate as expected. If you want to shoot at a specific item or object, you must aim a few inches away from the target. When we talk about moving targets, the situation becomes even more complicated.

CHECK THE CHEAPEST PRICE ON AMAZON!!

2. Carbon Express PileDriver Fletched Carbon Crossbolt

The Carbon Express PileDriver 52140-P set does not include field points, allowing you to choose the arrows that are best suited to your needs because they do not include them. Choose from a number of different target points to suit your needs and preferences. The field points of your choice can be easily inserted into the front of the bolt shaft with minimal effort. The arrows are the heaviest carbon composite crossbolts in the Carbon Express series, which is available only through Carbon Express. They are designed specifically for the shooter, with unique specifications on ultimate penetration for maximum effectiveness. When it comes to hunting large game, these bolts will give you the ultimate confidence. The package contains six universal flat nocks that allow for seamless string alignment. The inserted moon nocks, on the other hand, have a groove in which you can rest the string when it is drawn to its maximum length. To propel the bolt through the bow and to the target, the half-moon shape adds an additional level of propulsion. Regardless of which nock you choose to use in the arrows, each one is engineered to generate a significant amount of kinetic energy as well as tremendous knock-down power. The fletching is comprised of four-inch green hen vanes and a white cock vane, which aid in the arrow’s ability to fly straight and quickly through the air as it approaches the target. The Advanced Construction of the arrows, which also ensures consistency of the spine, ensures greater accuracy and consistency of the spine.

Pros

As implied by the name, these arrows are constructed of high-quality carbon fiber to ensure long-term durability while maintaining a lightweight design for increased precision. These arrows are available in two different lengths, 20 inches and 22 inches, depending on your requirements and budget. According to the manufacturer, these arrows are specifically designed for hunters who require the greatest possible level of penetration while still having the option of reusing the arrow. The carbon crossbolt provides the most kinetic energy and the most knock-down power possible, allowing you to quickly dispatch all of your hunting prey. Standard 4-inch vanes are included, and you will also receive six universal flat nocks with the purchase of the bolts.

Cons

It is important to use caution when shooting because some customers have reported that the nock on some arrows has been installed incorrectly. Apart from that, the majority of those who have purchased these arrows have expressed satisfaction with the quality of the products and have stated that they would highly recommend them.

CHECK THE CHEAPEST PRICE ON AMAZON!!

3. Speed Track Mini Crossbow Bolts 

The Speed Track Cobra is a set of 60 bolts that can be used with crossbows weighing 50 pounds and 80 pounds, respectively. In other words, you can shoot continuously and still have more than enough arrows left over for practice. Because of the large number of bolts included in the package, this product represents excellent value for money. Each bolt in the set has been engineered to provide dependable accuracy despite the set’s lightweight construction and design. They are also long-lasting, making them an excellent match for high-quality crossbows. When the bolts move through the air, the shorter length (6.25 inches) ensures that they fly easily and quickly because there is less air resistance. The arrows are available in two colors: bright yellow and glossy black, which ensures maximum visibility. This means that if the arrows become embedded in a dark target or if you accidentally misplace them, you will have an easier time locating them. Each bolt has a metal tip on the body of the plastic bolt, which increases its toughness and strength. In addition, the plastic construction makes it simple to clean while also providing corrosion resistance. The tips do not break off, but rather slip off or come away undamaged, allowing you to place or insert them back into the device with ease. You will also appreciate the sturdy fletching, which assists in propelling the bolts directly to their intended target by flying in a straight line. Each of the arrows flies straight and fast, depending on the weapon you are using.

Pros

There are two different colors of these sharp arrows available – yellow and black – but the ones you will receive in your package will be selected at random. For a very reasonable price, you will receive no less than 60 arrows in total. They are designed to fit crossbows weighing between 50 and 80 pounds and feature a lightweight, yet accurate, construction. These arrows are primarily for training purposes, but be careful because they are also sharp and can cause serious injury. Each bolt has a metal tip for added strength and toughness, which makes these arrows extremely dependable in their performance.

Cons

These arrows are made of plastic and do not have the same durability or precision as arrows made of wood or carbon fiber, for example. As a result, we recommend that you use them primarily for training purposes. Customer complaints included the fact that not all of their arrows were equipped with a metal shaft bolt, and that some of them were lighter and only covered in plastic.

CHECK THE CHEAPEST PRICE ON AMAZON!!

Buying guide

Despite the fact that crossbows have been around since the fourth century, it was not until the fifth century that China introduced bronze bolts. Modern crossbows make use of arrows that are designed to fit on a crossbow rail by using a specific power stroke. So, how do you know if you’ve got the best bolts for crossbow use on hand?

The best crossbow bolts for deer hunting have specifications that are appropriate for their intended use.

While the average length of a crossbow bolt is 20 inches, there are plenty of crossbow bolts that range in length from 16 inches to 22 inches. Some bolts are even shorter, measuring 6.25 inches in length. Of course, you have the option to choose the length you want based on your shooting style. Crossbolt manufacturers do specify the length of the bolts that they want to be used in conjunction with their products. This is your cue to go out and get bolts that are the proper lengths for the job. You have the option of using bolts that are slightly longer than what is recommended. Shorter ones, on the other hand, are not recommended because their tip may interfere with the crossbow’s railing when fired. The rail refers to the groove into which the projectile is slid into place. The shaft is the main body of the bolt, and it is the most visible part of the bolt. Everything else on the projectile is attached to this component, which is why it’s called the “hub” of the projectile. An extremely large percentage of crossbow bolts are made of either carbon fiber or aluminum. Bolts made of aluminum or carbon fiber have a lightweight structure. They are not prone to splintering when handled properly. Furthermore, they have a high level of resistance to bending. Consider bolts that contain a combination of the two types of materials. The shaft can have a variety of stiffnesses depending on the application. The spine is the term used to describe this particular feature. When it comes to crossbow bolts, they are no different than when we say a “spineless person” is a “weakling.” When the’spine’ of a bolt is higher, it is more resistant to flexion. When the term ‘grains’ is used in archery, it refers to the weight of the bolt shaft that is being used. When examining this particular feature of a bolt, make a note of the manufacturer’s specifications for the total weight in grains of the piece. You might even see this expressed as a GPI value, which stands for Grains Per Inch, which is simply another way of saying the same thing. If the product specifications include only GPI, you can calculate the total weight by multiplying the GPI value by the length of the shaft in inches. If the product specifications include only GPI, multiply the GPI value by the length of the shaft in inches. A shaft with an 18 GPI rating and a total length of 20 inches would result in a total shaft weight of 360 grain, which is equal to what you would get by multiplying 18 by 20 inches. If you prefer, you can convert this value to grams by multiplying it by 100. Simply multiply the grain weight by the constant 0.0648 to get the answer. In this case, the weight of the shaft in grams is 23.328, which is the value obtained by multiplying 0.0648 by 360, or the weight of the shaft in grams.

Crossbow bolts for hunting that are of high quality are constructed of high-quality materials.

The nock on a crossbow bolt is typically made of aluminum or plastic, depending on the model. When a bolt is connected to or inserted into the back of the shaft, it is referred to as a nock segment. The nock’s function is to hold the bolt in place while the shooter is lining up the bolt for the shot. Nocks for crossbow bolts are generally divided into two categories. Half moon nocks are distinguished by a distinctive groove that makes it simple to align them with the string before firing. Crossbow manufacturers have varying requirements for the types of nock on bolts that can be used with their products, which can be found here. While some crossbow manufacturers recommend only half-moon nocks for use with their crossbows, others prefer flat nocks for their crossbows. Look for bolts that accept both types of nocks, as this will allow you to use the type of nock that you are most comfortable with. Do not attempt to purchase bolts until you have confirmed that the crossbow manufacturer’s bolt specifications on this element have been determined. Nocks that are interchangeable between different crossbow models are extremely rare to find. In the absence of the specific type of bolt fitted with the specific type of nock, there is a high probability that the string will jump over the bolt, resulting in dry-firing. Dry firing not only causes crossbow damage, but it also puts the shooter’s life and limbs in danger of being shot. A major mistake is dry firing, also known as dry loosing, because you are allowing the string to come loose without a projectile in the chamber. It is incorrect on numerous counts because it is through the arrow or bolt that kinetic energy is dissipated through the vibration of the limbs and string, among other critical elements involved in the firing, which is incorrect on several counts. As with all other aspects of your bolt, making the right choice on your nocks is critical to its success. Flutings are the small ‘wings’ on the back of the crossbow bolt that serve as a point of support. It is quite close to the nock that they are located. Fletchings are responsible for maintaining a stable trajectory along the flight path. They contribute to the projectile’s continued movement in the desired direction. This component is referred to as a vane in some circles. The fletching also prevents the bolt from swaying or pitching to the right or left in an undesirable manner. While flying toward the target, it is this component that causes the bolt to oscillate around its axis. As a result, there is more stability in the system. Modern bolts are distinguished by the presence of three fletchings, which are made of plastic. Bird feathers, on the other hand, are used in the production of traditional fletchings. Bird feather fletchings are only occasionally, if ever, used in the construction of crossbow bolts. Fletchings come in a variety of lengths to choose from. As a result, there is no optimal length to consider in this particular component. As a general rule, a longer arrow shaft necessitates the use of longer fletchings, and this is true in both directions. Crossbow bolts are always delivered with a set of fletchings already attached to them.

Crossbow bolts of superior quality are supplied with two different types of arrowheads.

Field points, also known as target points, are points on the ground that are used for target practice. They are not permitted to be used for game hunting. Why? Due to the fact that they do not have any sharp edges to begin with, they will not be able to inflict enough internal damage to bring down their prey. Field points are distinguished by their distinctive pointy tip, which is just enough to dig deeply into the archery target without generating a great deal of destructive power. They can be easily extracted from the target’s material without causing it to crumble or break apart.

Field points, which are typically screwed into the front end of the bolt shaft, can also come with non-detachable, glued-on edges in the more affordable models.

The broadhead is the second type of arrowhead available. Broadheads are the weapons of choice for serious hunters. They are screwed into the tip of the shaft in the same manner as field points in order to be attached to it. It is possible to categorize broadheads even further into three sub-categories. Unlike other broadheads, fixed blade broadheads have blades that are fixed and razor-sharp and cannot be detached, resulting in a single-element construction. Expandable-blade broadheads have blades that are hidden from view and only open or activate when the projectile strikes the animal in question. This type causes the most damage because the broadhead digs deeper and then becomes lodged internally when the hidden blades are activated, causing the most damage possible. The blades of removable-blade broadheads can be removed from the bolt by turning the bolt counterclockwise. This provides the ability to swap out parts when necessary. Although they are more expensive, expandable broadheads are preferred by some hunters because of their ability to overcome wind resistance, which allows them to fly quickly through the air in the same way that a field point can efficiently move through the atmosphere. Field tips and broadheads are available in a variety of weights ranging from 125 to 150 grain on average. Consider products that are sold in sets of three or six if you want the best value for your money. More would be preferable.